Second Nature - SNMT2

Resources

Sales Literature

White Paper

Case Studies

Installation Manual

Second Nature - SNMT2

Second Nature - SNMT2

Second Nature - SNMT2

Second Nature - SNMT2

Second Nature, Medium-Temperature, CO2 Secondary Refrigeration System

SNMT2 medium-temperature systems use CO2 as the heat transfer fluid in a secondary coolant system. SNMT2 CO2 secondary refrigeration systems operate exactly like SNLT2 systems but at a temperature suitable for medium-temperature refrigeration. SNMT2 systems are a higher efficiency alternative to secondary systems using glycol.

• CO2 is a “natural refrigerant” that is non-ozone-depleting (ODP=0) with almost no global warming potential (GWP=1).
• More efficient than conventional HFC systems in some climates.
• A less expensive alternative to HFC refrigerants.
• An excellent way to help achieve GreenChill Platinum-Level Certification.
• CO2 transcritical systems have proven themselves in thousands of installations throughout Europe.

Second Nature - SNMT2

Second Nature - SNMT2

Second Nature - SNMT2

Features & Benefits

  • Enhanced refrigerant management.
  • Reduces initial refrigerant charge by 60-90% as well as required oil charge.
  • Reduces refrigerant leakage rates due to refrigerant pipe reduction.
  • Significant reduction in costs associated with refrigerant leaks.
  • Avoid costly refrigerant retrofits that also impact sales floor activity.
  • Helps your store achieve GreenChill certification.
  • Simplified installation and maintenance.
  • Enhanced energy and performance.

Benefits of Using Second Nature CO2 Technology

  • CO2 is considered a natural refrigerant with very low global warming potential (GWP=1).
  • CO2 is an inexpensive refrigerant, compared with HFC, and is widely available.
  • In excess of 70 percent reduction in HFC refrigerant charge can be achieved. The entire primary refrigerant charge is confined to the machine room and condenser to enable simple leak detection and servicing.
  • The piping system utilizes a modified loop copper piping system – CO2 lines are typically one to two sizes smaller than traditional DX piping systems.
  • Excellent material compatibility – most equipment for commercial refrigeration can be used.
  • Medium-temperature system uses CO2 as a two-phase secondary coolant taking advantage of CO2’s high latent heat capacity – this dramatically lowers flow rates (typical 90% reduction) and pumping power compared to conventional secondary fluids (e.g. glycols).
  • System energy performance equivalent or better than conventional HFC systems.
CONTACT A SALES REPRESENTATIVE

Better Practices Make Better Systems

There are many reasons why Hillphoenix® Refrigeration Systems continues to lead the industry. Why? No matter what the application or the specific refrigeration need, we can offer our customers a wide variety of options and configurations.
Learn More

Also Consider...

h

Don’t Leave Money on the Table

Many utilities offer incentives to companies for their efforts to save energy & improve on energy consumption. We can help you navigate the process.
h

Over 26,000 Trained Since 2006

Learn from our experience. We are your one-stop source for comprehensive commercial refrigeration information and training.
h

OEM Genuine Parts

Can you get parts when you need them? Our online store offers 24/7 access. One team, one number, one stop for refrigeration parts.
h

The AMS Group Energy Solutions

Identify and implement energy-saving services that improve the store environment, optimize performance and increase profitability.
Close Menu
×
×

Cart